| ● Mainpage ● Board Guidelines/Rules ● Help ● Search ● Members ● Calendar |
| Welcome Guest ( Log In | Register ) | Resend Validation Email |
|
|
Filipino Kalashnikov Airsoft -> Filipino Kalashnikov Airsoft Technical Area! -> Take down, Upgrades & Modification!
   |
The Nozzle Mod - now updated..., some few more improvements to it.
| Alencore Rambo |
Posted: November 01, 2008 01:02 pm
|
 Group: Moderator Posts: 377 Joined: June 01, 2007  |
Here's my old nozzle mod...for the unitiated hehe...this mod will solve the air leaks on the nozzle area...it's a cheap alternative especially for hard to find air sealed nozzles upgrades for m14, g36, sig 552 etc.
http://www.airsoftfaqs.com/technical-tips-...l-nozzle-2.html Now here's some further improvement for it. Mounted inside a hand drill and using a very sharp cutter just crater cut the base of the nozzle so a 1x3 or 1x4 oring will be more deep inside the nozzle base. Use sand paper to make the crated part more smoother and it will help stick the small oring much better using mighty bond or any other better bonding agent. With this technique the nozzle will sit properly way back the cylinder head's gas tube during draw stage which help avoid any misfeed issues if there are some using this nozzle mod. Don't forget to break it in first once fully lubricated using silicone oil by simply moving it back and forth until it feels loose or not too tight anymore.      |
 
|
| chicane |
Posted: November 01, 2008 07:02 pm
|
 Group: Members Posts: 48 Joined: July 29, 2007 |
Nice!!! Mas ok ata to kesa dun sa nauna
 komrad rambo 1 question lang po, san pa nakaka kuha nang ganyang klaseng o-ring kamukha nung ginamit nyo?galing talaga nang Pinoy! Dacal pung salamat! 
 |
|
|
| zenTaurus |
Posted: November 01, 2008 09:04 pm
|
 Group: Admin1 Posts: 1676 Joined: May 10, 2007 |
nicety !!! da doktah of a million tweaks does it again !!!
 buti ka, hindi pa pasmado at tunay na matiyaga  myself, i would use the smallest round-head cutter on my rotary tool to do that 
|
|
Beryl Maker!
| alakdan.net [aka 9th] |
Posted: November 02, 2008 08:35 pm
|
 Group: Moderator Posts: 2926 Joined: May 06, 2007 |
 Thanks for sharing Doki!
"The eM-poR is a cheap prostitute. She needs to be dressed with flashy accessories to be attractive. The kalashnikov is beautiful in herself. She does not need stilettos and lipstick. You may want to have a one night stand with a Stoner Rifle, but you marry the Kalashnikov.™" ======================================= ***UAA.PH >>> United Airsoft Alliance New Website*** |
|
| Alencore Rambo |
Posted: November 03, 2008 06:22 pm
|
|
Group: Moderator Posts: 377 Joined: June 01, 2007 |
Hehe salamat Papa Zen and Papa Jojo!!!...as well to Komrad Chicane kabalen ku ken hehe!!!!
ALam nyo naman idol ko din kayo!!! Komrad Chicane try mu mantun oring keng airgun store, refrigeration or airconditioning shop, or even auto supply. Yung mga 1x3 or 1x4 oring nakuha ko yan sa Simplex Binondo. medyo mahal nga 30 petots each minsan may 20. |
|
|
| moky |
Posted: November 04, 2008 02:20 am
|
 Group: Global Moderator Posts: 234 Joined: August 01, 2008 |
Very nice spending time and effort on doing that.
 Cheap alternative works.
 |
|
|
| taonggubat |
Posted: November 05, 2008 11:13 pm
|
 Group: Global Moderator Posts: 637 Joined: September 19, 2007 |
will try the mod this friday.. humiram pa ako ng mini drill.. pede na ata yung pang pambutas ng PCB na drill..
   |
|
|
| Alencore Rambo |
Posted: November 12, 2008 11:19 am
|
|
Group: Moderator Posts: 377 Joined: June 01, 2007 |
yeah basta pasok yung nozzle sa drill puyding puydi yan.
|
|
|
0 User(s) are reading this topic (0 Guests and 0 Anonymous Users)
0 Members:
 |
|