AK-105, Cyma 047D

REAL STEEL:
Assault rifle AK-105 was developed to change AKS-74U small size assault rifle. It is built on well recommended Kalashikov's assault rifles scheme, that inherited all the best qualities threw more than 50 years during AK assault rifle families modernization.

For more info: click here!






=====================================================

AIRSOFT:
AK-105 (Cyma 047D)

AK105 with Package contents:
Magazine
8.4V 1100mAH NiMH Battery with Low Quality Charger
Plastic Cleaning Rod
Front Sight Adjustment tool
Manual
*No Slings

All metal except of course the stock, handgrip and handguard.


Stock Chrono Reading.

First thing i notice( and i don't like it ) is the Flash Hider

But can easily modified to look real.
Note the arrow, removing the pin to detached front sight including the gas tube and handguard.



The Side folder Stock is quite realistic and without wooble


The Side mount scope attachment.
Note, AK105 should be non-Rib Top cover.


As always, Cyma used a generic parts.




The Side Folder Stock Locked flawlessly.


Side Folder Stock secured into receiver.


The Battery compartment



Additional Battery Cell can be use, total of 9.6V or 10.8V


Improved Fuse Holder?

TM Clone


Hop up Mech


400mm inner barrel


Crater cut and maybe a tight inner barrel


Nozzle




Probably strong motor


Selector screw "plastic" cover can easily remove using without tools.


Selector



The Gearbox, note the "plastic" bushing



Half moon


Removing the Slide lock.



The internals

Plastic Spring guide, ported Piston Head and type-0(closed) cylinder


Complete view of internals


Gears and ARL


Gears with "NZ" marking


Oversized tappet post, no need of Sector chip.



Switch block, nevermind if crappy, i always use mosfet.

Well that's it, internal rated very poor but nevertheless i only want the external for my new project.

[reserved for upgrade ]


I tried to assemble the unit using "USED" Parts.
(I left my upgrade kit in office)
-Spring guide with bearing
-Metal Cylinder Head
-CA Metal bushing
-Systema shims.
-Airseal Nozzle(with o-ring)

Other than that are all stock parts.

12rps/380fps

Stock:
11rps/372fps

*all chrono reading using 0.2g ICS bbs

I'm itching for this gun.... don't know if I can wait for the Kalash version waaaaa

komrad, the motor on this one is the same with my Kalash AKS74.. well i got a lemon motor.. my friend got a nice motor..

mukhang malinis loob ng mek

delikado yata ung NZ gear, kom alakdan

verrry nice reiew, komrad alakdan

first ever, am i right? a milestone then?

a celebration is in order

I'm going to try tonight if the stock motor can drive a stronger spring i have komrad.

Yeah, the mek quality is good komrad, alanganin lang ako sa mga gears.
Though i got a stock ratio guarder kit for this project, try ko parin using pdi190 with stock gears into two weekend games kung anong mangyari komrad.

Hehehe...i'm trying my best, ingat lang ako baka titirahin na naman ang inglish ko komrad vityaz...Aussie accent pa naman ako ngayon .

Well, Pictures Speak A Thousand Words

Thanks komrad vityaz....ohh speaking of vityaz...i hope i can make an AK105 Vityaz out of this gun.

@admins/staff: Sorry for multiple quote

Will wait for kalash version pero kung wala then Cyma na..

excellent effort, kom alakdan. sana masundan pa

waaaaaaa
Not now, ayoko munang dagdagan eto dahil halos sabay ang SA58 nito komrad zT.

hehehe....ewan ko lang if may lalabas na bago

nice review komrad! the kalash would probably be better than this one

dami bago beng2.. sakto breaking sa bagong gamesite no? hehe

edit:
would it be possible to hollow out the folding stock to make way for a larger battery?

anong diff ng 105 sa 102?

http://www.enemyforces.com/firearms/ak105.htm

ganda ng SA58

what i meant was masundan pa ng mga ibang review, kom alakdan

i think its not possible.. very slim ang stock nya.. kung possible naman with lipolies, grabe ang mods required para gawan ng battery compartment..


i think its the caliber, the main difference of the two..